Display And Control Elements - Husqvarna S 11 Operating Instructions Manual

This machine is intended for commercial use, for example, in
hotels, schools, hospitals, factories, shops, offices and in the rental
business.
When unpacking, check for completeness and transport damage.
Before use, the operators should be provided with information,
instructions and training for the use of the vacuum cleaner and the
substances that it is to be used for, including the safe procedure for
the removal of the gathered material.
3

Display and control elements

Switch position Function
0 Vacuum cleaner is switched off
I Vacuum cleaner is running
Standby mode for ON/OFF
A
automatic mode
Standby mode for ON/OFF
RA
automatic mode
Automatic filter cleaning function
Fill level indicator *
35
Setting the suction hose
diameter *
6 - en
Description
- Plug socket under voltage
- Plug socket under voltage
- Automatic filter cleaning function off
- Plug socket under voltage
- The vacuum cleaner is switched on and off via the connected electrical/
compressed air tool* at the plug socket
- Standby mode like >A< plus automatic filter cleaning
- Filter cleaning is performed automatically during the next working break
when the minimum volume flow level is reached (switch setting RA)
- When the container is full and/or there is a blockage in the suction hose, the
full indicator lights up. On the M and H vacuum cleaners, an acoustic signal
is also emitted
- On M-/H-/H-asbestos vacuum cleaners for volume flow monitoring, to trigger
an audible warning signal if the air speed falls below 20 m/s
* depending on model