Use a tool (2) to release the battery from the computer (3).
Reverse this procedure to install the RTC battery.
To remove the speakers, use this procedure and illustration.
Speaker description and part number
Before removing the speakers, follow these steps:
Prepare the computer for disassembly
Remove the bottom cover
Disconnect the battery cable from the system board (see
Remove the speakers:
Disconnect the speaker cable from the system board (1).
Remove the cable between the speakers from the clips along the bottom of the battery (2).
Remove the two Phillips M2.0 × 4.0 screws (3) that secure each speaker to the computer.
Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page
Battery on page
Spare part number