5
40
Angle gear
Shaft
The shaft contains a drive axle guide
that is easily replaced.
Centre the axle control in the shaft when
a new one is fi tted.
503 80 17-01
Shaft
The shaft contains a long plastic guide
to prevent vibrations in the drive axle.
The guide is easily removed for
replacement.
When replacing the axle guide, the
replacement must be inserted into the
shaft so that the distance is the same to
the two ends of the shaft.
Lubricate the drive axle with grease no.
503 80 17-01 when assembling.
Slide the drive axle into the guide at the
same time as you rotate it.
Apply new grease and repeat the
procedure from the other end of the
guide.