Husqvarna 555FX Workshop Manual page 31

3
Fuel system
Dismantle the throttle handle (A), the
lock to prevent accidental throttle
operation (B), the start throttle lock
(C) and the throttle stop (D) in order to
check if replacement is necessary.
The stop switch can also be
disassembled now, and replaced if
necessary. Use a screwdriver to press
the stop switch's wing locks (E).
Tip!
Reassembly of the throttle easier if a
thin steel wire is wrapped around the
handle and bolt (F) in order to hold the
throttle cable and short-circuit cables in
place.
29