Download  Print this page

Maintenance Schedule For The Service Center - Husqvarna Rider 213C Workshop Manual

Hide thumbs

Advertisement

6 Maintenance schedule for the service center

1. PREPARE THE PRODUCT
Do a check of the battery.
Do a check of the blades.
Make sure that the hydraulic hoses and couplings are clean and not damaged.
Do a check of the belts and pulleys.
Do a check of the steering chain of the inner side of the frame tunnel.
Do an inspection, lubricate and adjust all wires.
Make sure that all screws and nuts are tightened with the correct torque.
Lubricate the operators seat.
Lubricate the wheels and blade bearings on the cutting deck.
Lubricate the pedals on the inner side of the frame tunnel.
Lubricate the belt tensioner.
2. ENGINE
Do a check of the fuel hose. Replace if it is necessary.
Replace the fuel filter.
Replace the prefilter and paper filter in the air filter.
Clean the engine and the hydrostatic transmission.
Do an inspection of the cooling fins on the hydrostatic transmission.
Do a check of the muffler and the heat deflector.
1
Replace the engine oil.
Replace the engine oil filter.
Replace the spark plug.
Do a check of the lights.
Do an update of the firmware.
Do a check of the battery and charge if it is necessary.
1
For Kawasaki engines, replace the first oil after 8h.
934 - 002 - 25.06.2019
Technical data on page 59 .
Refer to
First serv-
Maintenance interval
icing
in hours
50
100
O
O
O
O
O
O
O
O
O
O
O
O
O
First serv-
Maintenance interval
icing
in hours
50
100
O
O
Clean
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Maintenance schedule for the service
200
200
center - 13

Advertisement

loading

  Also See for Husqvarna Rider 213C

This manual is also suitable for:

Rider 214tRider 216 awd