4
24
Handlebar
Handlebar
Model LC48
Dismantle the control from the handle-
bar and the engine brake cable from the
mounting.
Unscrew the engine brake cable holder.
502 71 27-01
502 50 23-01
Fold down the locking handle, clamp the
control part and its fastening together in
the cutting cover and unscrew the locking
handle.
Separate both control parts and remove
the handlebar.
502 51 67-01
Handlebar
Model LC53
Dismantle all controls from the upper part
of the handlebar including the box over
the setting control.
502 51 67-01
Handlebar
Model LC48
Dismantle the control screwed to the
handlebar.
Clamp the sides of the engine brake bar
together and detach from the handlebar.
Unhook the cable from the mounting.
Unscrew the engine brake cable holder
from the handlebar.
Unhook the cable by the engine (see
chapter entitled "Controls").
Fold down the locking handle, clamp the
control part and its fastening together in
the cutting cover and unscrew the locking
handle.
Repeat the procedure on the other control
part.
Separate both control parts and remove
the handlebar.
The coupling piece (A) can be unscrewed
in the event of replacement.
Handlebar
Model LC53
Dismantle all controls from the top part
of the handlebar (see chapter entitled
"Controls") including the box over the
setting control (two screws underneath).
Remove the top part of the handlebar.