Control Panel - Siemens ultraSense WTXD5500UC Operating, Care And Installation Instructions Manual

OPERATING INSTRUCTIONS

Control Panel

start/stop button
Starts, interrupts and ends the drying
process.
14
Buttons for options (in addition to the
program if required). See page 18.
delicates
Press for temperature sensitive textiles
(e.g. acrylic fibers). The temperature of the
drying process is reduced, the drying time is
extended correspondingly.
signal
An acoustic signal indicates the end of the
program.
Display
Indicates the estimated remaining time of programs.
Indicator light (LED)
Indicates that the lint filter requires cleaning.
Indicator lights (LED)
Indicate the current state
of the drying process.
Program selector
Selects a program. See page 18.
Can be rotated in both directions.
To switch off the dryer, rotate the
program selector to "off".