Download  Print this page

Changing The Light Bulbs; Removing The Base Grille - Whirlpool ET18PK Use & Care Manual

No-frost refrigerator-freezers
Hide thumbs


the light
Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to the refrigerator at the main
power supply.
Failure to do so could result in electrical
shock or personal injury.
To change the refrigerator
1. Disconnect
refrigerator from power supply.
2. Reach behind the Control Panel to remove
3. Replace with a 40-watt appliance bulb.
4. Reconnect refrigerator to power suppfy.
To change freezer light (ET22PK):
1. Disconnect refrigerator from power supply.
2. Grasp the top and bottom of the light shield.
3. Squeeze and pull light shield out.
4. Replace with a 25-watt appliance bulb.
5. Snap light shield into place.
6. Reconnect refrigerator to power supply.
NOTE: Not all commercial
appliance bulbs will fit
your refrigerator.
Be sure to replace a bulb with
one of the same size and shape.
the base grille
To remove the grille:
1. Open refrigerator door.
2. Pull base grille forward to release the support
tabs from the metal clips.
3. Do not remove Tech Sheet fastened behind
the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 15.



  Also See for Whirlpool ET18PK

  Related Manuals for Whirlpool ET18PK

This manual is also suitable for: