Customer Replaceable Units (Cru's); Cleaning; Internal Cleaning; External Cleaning - Siemens GAS-Guard 8 Operation And Maintenance Manual

GAS-Guard 8 and GAS-Guard 3 Operations and Maintenance Guide

Customer Replaceable Units (CRU's)

Customer Replaceable Units (CRU's) are defined as customer replaceable parts onsite without
decommissioning the GAS-Guard.
Part #
270-0004-XX
290-0020-XX
290-0017-XX
292-0018-XX
292-0019-XX
370-0025-XX
370-0026-XX
370-0027-XX
430-0032-XX
750-0076-XX
750-0084-XX
750-0090-XX
250-0130-XX
R750-0076-XX
R750-0084-XX
Please contact Technical Support (support@serveron.com) for removal and installation procedures.

Cleaning

Internal Cleaning

No internal cleaning of the GAS-Guard is required; doing so may cause damage the internal
components and void the warranty.

External Cleaning

No external cleaning of the GAS-Guard is required. If external cleaning is desired, water is the only
recommended cleaning solution. Direct spray of high-pressure water onto the GAS-Guard door seal,
LED's, oil/helium bulkhead fittings and cable glands should be avoided.
GAS-Guard 3 does not require replacement column assembly
1
Description
Helium Dryer
Regulator, CAL,
Cylinder, Verification
Regulator Helium
Regulator Helium w/ Pressure Switch
LED, Front Panel, Green
LED, Front Panel, Red
LED, Front Panel, Blue
Fuse, TD, 4 Amps, 1/4" x 1 1/4"
Column Assembly, GAS-Guard 8
Assy, Power Supply
Column Assembly, GAS-Guard 3
Filter, Oil
Replacement Column Assembly
Refurbished Power Supply Assy
16 of 18
810-1734-00 Rev A
1
, GAS-Guard 8

Table 6: Customer Replaceable Units