Specifications - Pioneer VSX-1022-K Service Manual

1

2. SPECIFICATIONS

A
VSX-1022-K, VSX-822-K
Amplifier section
Continuous average power output of 80 watts* per channel,
min., at 8 ohms, from 20 Hz to 20 000 Hz with no more than
0.08 %** total harmonic distortion.
Front (stereo) ................................................... 80 W + 80 W
Power output (1 kHz, 6 Ω, 1 %) ...............140 W per channel
Guaranteed speaker impedance ........................ 6 Ω to 16 Ω
* Measured pursuant to the Federal Trade Commission's
Trade Regulation rule on Power Output Claims for Amplifiers
** Measured by Audio Spectrum Analyzer
B
Audio Section
Input (Sensitivity/Impedance)
LINE.............................................................200 mV/47 kΩ
Signal-to-Noise Ratio (IHF, short circuited, A network)
LINE.......................................................................... 98 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
LINE.......................................................................... 79 dB
Video Section
Signal level
Composite .................................................... 1 Vp-p (75 Ω)
C
Tuner Section
Frequency Range (FM) ..................... 87.5 MHz to 108 MHz
Antenna Input (FM)................................... 75 Ω unbalanced
Frequency Range (AM) ...................... 530 kHz to 1700 kHz
Antenna (AM) .................................................Loop antenna
Digital In/Out Section
HDMI terminal .............................................. Type A (19-pin)
HDMI output type................................................5 V, 100 mA
USB terminal ............................USB2.0 Full Speed (Type A)
iPod terminal............................USB, and Video (Composite)
ADAPTER PORT terminal ..................................5 V, 100 mA
D
Network Section
LAN terminal................................ 10 BASE-T/100 BASE-TX
Miscellaneous
Power Requirements ...................................AC 120 V, 60 Hz
Power Consumption ................................520 W (VSX-1022)
In standby............................................. 0.4 W (Control OFF)
Dimensions....... 435 mm (W) x 168 mm (H) x 342.5 mm (D)
173/16 in. (W) x 65/8 in. (H) x 145/16 in. (D)
Weight (without package) ..... 9.3 kg (20 lb 9 oz) (VSX-1022)
E
Note
• Specifications and the design are subject to possible
modifications without notice, due to improvements.
• This product includes FontAvenue® fonts licensed by NEC
Corporation. FontAvenue is a registered trademark of NEC
Corporation.
F
6
1
2
450 W (VSX-822)
8.9 kg (19 lb 10 oz) (VSX-822)
VSX-1022-K
2
3
VSX-42
Amplifier section
Continuous average power output of 80 watts* per channel,
min., at 8 ohms, from 20 Hz to 20 000 Hz with no more than
0.08 %** total harmonic distortion.
Front (stereo) ................................................... 80 W + 80 W
Guaranteed speaker impedance ........................ 6 Ω to 16 Ω
* Measured pursuant to the Federal Trade Commission's
Trade Regulation rule on Power Output Claims for Amplifiers
** Measured by Audio Spectrum Analyzer
Audio Section
Input (Sensitivity/Impedance)
LINE.............................................................200 mV/47 kΩ
Signal-to-Noise Ratio (IHF, short circuited, A network)
LINE.......................................................................... 98 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
LINE.......................................................................... 79 dB
Video Section
Signal level
Composite .................................................... 1 Vp-p (75 Ω)
Tuner Section
Frequency Range (FM) ..................... 87.5 MHz to 108 MHz
Antenna Input (FM)................................... 75 Ω unbalanced
Frequency Range (AM) ...................... 530 kHz to 1700 kHz
Antenna (AM) .................................................Loop antenna
Digital In/Out Section
HDMI terminal .............................................. Type A (19-pin)
HDMI output type................................................5 V, 100 mA
USB terminal ............................USB2.0 Full Speed (Type A)
iPod terminal............................USB, and Video (Composite)
ADAPTER PORT terminal ..................................5 V, 100 mA
Network Section
LAN terminal................................ 10 BASE-T/100 BASE-TX
Integrated control section
Control (IR) terminal ....................... Ø 3.5 Mini-jack (MONO)
IR signal................................ High Active (High Level: 2.0 V)
12 V Trigger terminal....................... Ø 3.5 Mini-jack (MONO)
12 V Trigger output type......................................12 V, 50 mA
Miscellaneous
Power Requirements ...................................AC 120 V, 60 Hz
Power Consumption ....................................................520 W
In standby............................................. 0.4 W (Control OFF)
Dimensions....... 435 mm (W) x 168 mm (H) x 342.5 mm (D)
173/16 in. (W) x 65/8 in. (H) x 145/16 in. (D)
Weight (without package) ......................... 9.3 kg (20 lb 9 oz)
Note
• Specifications and the design are subject to possible
modifications without notice, due to improvements.
• This product includes FontAvenue® fonts licensed by NEC
Corporation. FontAvenue is a registered trademark of NEC
Corporation.
3
4
4