Changing A Setting; To Add A Dish After Startrng - Whirlpool DU8100XT Use & Care Manual

Undercounter dishwasher
Table of Contents

Advertisement

.
AIR DRY Cycle
If the AIR DRY Cycle
is selected,
air in the
dishwasher
is not heated.
Using this option
helps save energy,
but dishes take longer
I!
SAPi
rl
R
.m.m.m.m
to dry [overnight)
and some water
spot-
ting may result. Some items (such as plas-
I?
IEI1"U
tics] may need towel drying.
For best results, use a solid rinse aid.
RINSE & HOLD Cycle
For rinsing a few items to be washed
one
or more days later. Cycle
time is about10
mrnutes.
Changing a setting
You can
change
a setting
anytime
during
3. Be sure the detergent
dispensers
are filled
any cycle.
properly
for the new cycle.
1. Lift up on the door latch to unlatch
the door
4. Press door firmly to latch
it. The dishwasher
and stop the cycle.
Don't open the door until
will automatically
start the new cycle.
the spray arms stop spinning.
2. Turn the Cycle
Control Knob clockwise
to the
cycle
you want.
To add a dish after starting
1. To be sure the added
item is washed
and
4. Close the door. Do not latch
it. Wait 30 sec-
rinsed, add
the item before
the end of the
onds for air in the dishwasher
to warm up. This
main wash.
helps
reduce
the amount
of moisture
that
2. Lift up on the door latch to unlatch
door to
can come
from the vent when restarting
the
stop the cycle.
Don't open the door until the
cycle.
spray arms stop spinning.
5. Press door firmly to latch
it. The dishwasher
3. Open the door and add the dish.
will automatically
start where
it stopped.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Du8116xt

Table of Contents