Uv Lamp Rplacement - Hafele CF-8116 Instruction Manual

Filter filter maintenance and replace
-Every three months, take off the filter, put it under the sunshine to make it dry and use vacuum
cleaner or soft brush to clean the dust on the filter. It will help extend the life of the filter and
keep the filter performance.
-Pre-Filterwith Activated Carbon, HEPA filter are no washable.
-Note: Filters should be replaced at least once each 6 months. More frequent cleaning and
replacing may be required depending on environmental conditions.

UV LAMP RPLACEMENT

1. Unscrew the UV lamp holder..
2. Take out the connecting rod carefully and fetch the UV lamp.
3. Insert a new UV lamp then fix it by screwing the connecting rod.
Note: Do not look into the UV lamp when it is ON.
Dust sensor cleaning
Clean the dust sensor every 2 months for optimal functioning of the appliance. Clean it more
frequently if you use the appliance in a dusty environment.
1. Clean the dust sensor cover with a soft brush.
2. Open the dust sensor cover.
3. Clean the dust sensor, the dust inlet and the dust outlet with a lightly soft cotton swab.
4. Reattach the air quality sensor cover.
Note: Do not use any corrosive or flammable detergent to clean the appliance, in case any
damage.
9