Selecting Cycle Options - Whirlpool 400 Series Use And Care Manual

Canceling a cycle
You can cancel a cycle at any time.
1. Turn the Cycle control knob slowly
clockwise until you hear water draining.
Let the dishwasher drain completely.
2. Open the door.
3. Turn the Cycle control knob to OFF.
Selecting cycle options
You can select a drying option after the
dishwasher starts as long as the Cycle
control knob had not reached DRY.
HEAT DRY option
If the HEAT DRY option is selected, air in
the dishwasher is heated during the "dry"
part of the cycle. For best results, use a
liquid rinse agent.
Series 400,800, Series 840
and 810 models
models
AIR DRY option
When AIR DRY is selected, the air in the
dishwasher is not heated during the "dry"
portion of a cycle. Using AIR DRY helps
save energy, but dishes take longer to dry
and some spotting can occur. Some items
(such as plastics) may need towel drying.
For best drying, use a liquid rinse agent.
NOTE: You must chose either AIR DRY or
HEAT DRY for each wash cycle. Select AIR
DRY when using the RINSE & HOLD cycle
(series 800, 810, and 840 models).
Series 400,
800, and I31 0
models
Series 840
models
13