Whirlpool AD0402XM0 Use & Care Manual page 6

1.
Turn humidistat to UNIT OFF, then plug in the
dehumidifier.
Your dehumidifier has an
automatic humidi-
'
stat.
Turn humidistat control left towards DRYEST
for normal operation. Set at number 5 or 6 to
start. Adjust later, if necessary
When humidity in the room increases, the
dehumidifier automatically starts. When the
humidity decreases to the selected level, the
dehumidifier automatically stops.
1 [
3. If you need more dehumidification, turn control
4. Stop the unit manually by turning the control to
to a higher number. Unit will run continuously at UNIT OFF
DRYEST setting. If you need less, set on a lower
number.
Setting the Water Level Control
All models except the 12 pint (5.6 L) capacity model have an adjustable water
level control. The water level control can be set in two positions to automatically turn
off the unit when the pan is full. This prevents the danger of overflow.
Pan must be in proper position for water level control switch to work.
4
WATER LEVEL
NORMAL FILL -
Water level adjustment set on the
left side indentation. The water
pan and water will weigh ap-
proximately 16 Ibs. (7.2 kg].
MAXIMUM FILL -
Move the water level control to
the raised area on the right side.
The water pan and water will
weigh approximately 24 Ibs. (10.8
kg).
The water level control switch will automatically turn off the dehumidifier atthe
fill level you selected. You may need to loosen the screw to move the water level
adjustment. Retighten screw when adjusted.
6