cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.
Zone
Cleaning agent
Stainless steel sur-
Hot soapy water:
faces*
Clean with a dish cloth and dry with a
soft cloth. On stainless steel surfaces,
(depending on
always wipe parallel to the natural grain.
appliance model)
Otherwise, you may scratch the surface.
Remove patches and splashes of limes-
cale, grease, starch and albumin (e.g.
egg white) immediately. Corrosion can
form under such patches and splashes.
Special care products suitable for hot
stainless steel surfaces are available
from our after-sales service and from
specialist retailers. Apply a thin layer of
care product with a soft cloth.
Enamel, painted,
Hot soapy water:
plastic and screen-
Clean with a dish cloth and dry with a
printed surfaces*
soft cloth. Do not use glass cleaner or
glass scrapers for cleaning.
(depending on
appliance model)
Control panel
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaner or
glass scrapers for cleaning.
Upper glass cover*
Glass cleaner:
Clean with a soft cloth.
(depending on
You can remove the upper glass cover
appliance model)
for cleaning. To find out how to do this,
please refer to the section Upper glass
cover.
Rotary knobs
Hot soapy water:
Do not remove.
Clean with a dish cloth and dry with a
soft cloth.
Hob surround
Hot soapy water:
Do not clean with a glass scraper, lemon
juice or vinegar.
Gas hob and pan
Hot soapy water.
supports*
Use very little water. Water must not be
allowed to enter the appliance through
(depending on
the base of the burners.
appliance model)
Clean off boiled-over liquids and spilt
food immediately.
You can remove the pan supports.
Cast iron pan supports*:
Do not clean in the dishwasher.
Gas burners*
Remove the burner head and cap and
clean with hot soapy water.
(depending on
Do not clean in the dishwasher.
appliance model)
The gas outlet openings must remain
unobstructed at all times.
Ignition plugs: Small, soft brush.
The gas burners only work properly when
the ignition plugs are dry. Dry all parts
thoroughly. Ensure that they are refitted
correctly.
The burner caps are coated in black
enamel. The colour may change over
time. This does not impair their perfor-
mance.
* Optional (available for some appliances, depending on the
appliance model)