Download  Print this page

Reverse Door Swing - Whirlpool W10115226B Installation Instructions Manual

27" wide models - u.s.a. only
Hide thumbs

Advertisement

Table of Contents

Reverse Door Swing

(models with side-swing doors with glass)
1.
Place towel on dryer
Place towel on top of dryer to avoid damaging the surface.
2.
Remove bottom screws
Open dryer door. Remove bottom screws from dryer cabinet
side of hinges. Loosen (do not remove) top screws from dryer
cabinet side of hinges.
3.
lift door off top screws
Lift door until top screws in dryer cabinet are in large part of
hinge slot. Pull door forward off screws. Set door (handle side
up) on top of dryer. Remove top screws from dryer cabinet.
4.
Remove screws from hinges
Remove screws attaching hinges to door.
5.
Flip door over
Flip door over so handle side is down.
6.
Remove screws from door
Remove screws at top, bottom, and side of door (4 screws).
Keep door screws separate from hinge screws as they are
different sizes.
7.
Separate inner from outer door
Holding door over towel on dryer, pry inner door and lift to
separate it from outer door.
noTE: Do not pull on door seal or plastic door catches.
19

Advertisement

Table of Contents
loading

  Related Manuals for Whirlpool W10115226B

This manual is also suitable for:

W10115227b-spMedx700xlMedx700xw