Timed Dry - Whirlpool LE9800XS Use And Care Manual

3
Touch an Electronic DRY-MISER" Control
n
or TIMED DRY Selection.
-
Electronic DRY-MISER@ Control
l
Touch the Electronic DRY-MISER
Control that describes the dryness
YOU want for the load.
A sensor on the back of the dryer
drum senses the moisture in the
load. When the selected dryness has
been reached, the dryer automati-
cally shuts off. If dryness is not what
you expected, use the following
as a guide:
l
Touch a TIMED DRY selection for
any load you want to dry by time.
The Time Display will automati-
cally show 30 minutes.
l
If more time is wanted, touch A
MORE up to 99 minutes.
l
If less time is wanted, touch v LESS,
The TIMED DRY selection is good for
very small loads or large bulky items.
l
For the first few loads, use REG DRY
When finished, check the load for
desired dryness.
IMPORTANT: If the load you have
finished drying is not dry enough...
l
If the load is not dry enough, use
MORE DRY or VERY DRY the next time.
l
If the load is too dry, use LESS DRY
the next time.
l
If you plan to iron the clothes after
drying, use DAMP DRY
1. Touch POWER "OFF,"then touch
POWER "ON!'
2. Touch a FABRIC SELECTION tor
the load type.
3. Set TIMED DRY FOR 20 minutes.
Remember to select a different
dryness setting for the next similar
load.
5
tronic DRY-MISER Contrcbl, the Time
Display will show "AU: After a period
of tumbling, the dryer will be able to
calculate the remaining time needed
to dry the load. The time on the display
will count down until the cycle ends.
TIMED DRY