Drying Times; Mixed Loads; End-Of-Cycle Signal - Whirlpool LE7680XS Use & Care Manual

Drying times Mixed loads
Drying times will vary depending on.
0 amount of moisture in the clothes.
0 type and weight of the fabric.
0 size of the load.
l
room temperature around the
dryer.
l
temperature of the wash rinse
water.
0 amount of lint in the lint screen.
l
dryer temperature selection.
See your "Dryer Guide"
for more informatlon
When drying a load with different
kinds and weights of fabrics, use the
cycle suggested for the lightest fab-
rics. When the dryer stops, remove
dry items and reset the control.
End-of-cycle signal
The dryer sounds a signal to let you know
when the cycle is finished. The signal cannot be
turned off and is not adjustable.
The signal is helpful when you are drying
permanent press, synthetics and other items
that should be taken out as soon as the dryer
Clean lint screen before
each load.
If you
neglect to clean your lint screen, the signal will
sound. The [whistle tone] signal lets you know
the air flow is being restricted. Restricted air flow
reduces drying efficiency.
Turn off the dryer and clean the lint screen as
shown on page 9.