Spinning - Miele WCA 020 Active Operating Instructions Manual

Spinning

Final spin speed in wash pro-
grammes
When a programme is selected, the
sensor control for the optimum spin
speed for that programme will be
brightly lit up in the control field.
A faster spin speed can be selected for
certain wash programmes.
The highest selectable spin speed is in-
dicated in the table.
Programme
ECO 40-60
Cottons
Minimum iron
Woollens 
Delicates
Express 20
Dark garments/Denim
Outerwear
Proofing
Drain/Spin
Separate rinse/Starch
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the in-
terim spin speed. If a spin speed of less
than 700 rpm is selected for the Cot-
tons programme, an additional rinse is
introduced.
28
Selecting Rinse hold (final spin)
 Touch the  sensor control re-
peatedly until the  indicator (Rinse
hold) lights up.
The laundry is not spun after the final
rinse cycle and remains in the rinse wa-
ter. This helps to prevent creasing if the
laundry is not going to be removed from
the washing machine immediately after
the end of the programme.
Ending a programme with a spin
rpm
cycle
1400
The indicator with the ideal spin speed
1400
lights up. You can change the spin
speed with the  sensor control.
1200
1200
 Touch the  sensor control.
900
Ending a programme without a spin
1200
cycle
1200
 Touch the  sensor control re-
900
peatedly until the  indicator
(without spin) lights up.
1200
1400  Touch the  sensor control.
1200