Download  Print this page

Lint Removal - Whirlpool LE5795XP Use And Care Manual

Large capacity automatic dryers
Hide thumbs

Advertisement

Lint removal
Thermostats
Host denlalt
Usotrlo
drya
with bti
puwl ranovad
12
Gas dryer with lower tront-
Poce8S p-d
removed
Lint can gather inside the dryer and be
a fuel for fire. tt is recommended the
lint be removed every 2 to 3 years, or
more often, depending on dryer
usage. Cleaning should be done by a
qualified person. lf you have any
questions, please call our Consumer
hhtance
Center at 1-800-253-l 301.
usctrlcrlSho&Uld
Personal fnJluy Hazard
l
Unplug the power supply cord
of turn off the
l
bctftcel power
before removing dryer panels.
. Make SW. the dryer b cool.
l
hyer pms can have sharp
0dg0a Uw car0 when han-
dllng.
l
When repbclng front psnel
after lint removal, the wire clips
holding the doer awftch wlree
must bs anchored to top of
front Md sldo pneb.
wires
MUST NOT touch rotatfng
drum. (See pago 13, sfap 7.)
Fallun to do ao could result In
ebctrlclllshcckorpersonal
WW.
ffyourdryerbebctrk,orbgas
and has a lower front access panel:
1. Unplug the power supply cord or
turn off the electrical power.
2. Remove bade panel (electric) or
bwer front access panel (gas). See
lnstallatii
Instructions.
3. Remove lint from shaded area in
illustration with a soft brush or
vacuum deaner. Avoid damaging
wires, thermostats (elect@. funnel
(gas) or igniter (gas).
4. Replace panel; reconnect and
level dryer again, if necessary.
NOTE: See page 13 if your dryer is
gas and has a full front panel.

Advertisement

loading

  Also See for Whirlpool LE5795XP

  Related Manuals for Whirlpool LE5795XP