Diskette 2D Drive System Checkout Procedure - IBM 5280 User's Setup Procedures

Diskette 2D Drive System Checkout Procedure
36. Press the number 2 to select the 2D-double density test, then
press the Enter key.
37. Observe this display.
Insert verification diskette in drive to be tested and enter
device address:
1l~
_______________
F_.r_es_s __ E_NT_E_R ____________________ 53_--_0_2.,Jr
38. Determine the device address of the diskette drive where the
verification diskette is located.
The device address is the four-digit number on the label next to the
diskette drive.
39. Key the device address and press the Enter key.
You may have to press and hold the Alpha key while pressing the letter
C in some four-digit numbers of the diskette drive.
User's Setup Procedures 109