Download Print this page

Whirlpool 6LE5700XSW0 Installation Instructions

Whirlpool electric dryer use and care guide

Advertisement

Quick Links

IMPORTANT:
Read and save
these instructions.
IMPORTANT:
Electric Dryer
Part No. 3394023 Rev. A
Installer:
Leave Installation Instructions
with the homeowner.
Homeowner:
Keep installation Instructions
for future reference.
Save Installation Instructions for local
electrical inspector's use.
,
I

Advertisement

loading

Summary of Contents for Whirlpool 6LE5700XSW0

  • Page 1 IMPORTANT: Read and save these instructions. IMPORTANT: Installer: Leave Installation Instructions with the homeowner. Homeowner: Keep installation Instructions for future reference. Save Installation Instructions for local electrical inspector’s use. Electric Dryer Part No. 3394023 Rev. A...
  • Page 2: Tools And Materials

    Before you start... Check location where dryer will be installed. Proper installation is your responsibility. The dryer must not be installed or stored in an area where it will be exposed to water and/or weather. Make sure you have everything necessary correct installation.
  • Page 3: Exhaust Requirements

    Exhaust requirements FlrWHealth Hazard Do Not use non-metal, flexible duct. Do Not use metal duct smaller than tour Inches (10.2 cm) In diameter. Do Not use exhaust hoods wlth magnetic latches. Check that exhaust system Is not longer than speclfled. Exhaust systems longer than speclfled will: - Accumulate Ilnt.
  • Page 4: Recessed And Closet Installation Instructions

    w The electrical connections must be done by a licensed electrician. W Check levelness of dryer by placing level on top of the dryer, first side to side, then front to back. If dryer is not level, adjust the legs of the dryer up or down. Dryer must be level to prevent noise and poor drying performance.
  • Page 5 “On” position. E. Start button has been pushed firmly. Part No. 3394023 Rev. A 01994 Whirlpool Corporation Floor Damage Slide dryer onto cardboard or hardboard before movlng across floor. Failure to do so may cause damage to tloor coverlng.