Emerson Copeland EazyCool ZX Series Application Manuallines page 44

Appendix 4: Parameter list level 1 (Pr1) & 2 (Pr2)
Legend
L1 = Parameter in Level 1 (without password)
L2 = Parameter in Level 2 (with password = 3 2 1)
N.V. = Parameter not accessible
Code Description
A01 Probe P1 configuration
A02 Start of scaling for probe 1 (0-5V)
A03 End of scaling for probe 1 (0-5V)
A04 Probe P1 calibration
A05 Probe P1 reading error delay (P1C=0-5V)
A06 Probe P2 configuration
A07 Start of scaling for probe 2
A08 End of scaling for probe 2
A09 Probe P2 calibration
A10 Probe P2 reading error delay (P2C=0-5V)
A11 Probe P3 configuration
A12 Probe P3 calibration
A13 Probe P4 configuration
A14 Probe P4 calibration
C6.1.6/0613-0915/E
Range
Not used (0-NU)
Suction pressure (0-5V)(1-SUP)
0-5V:'-1.5 bar to P1E; -21 PSI to P1E
0-5V: P1i to 99.9 bar; P1i to 999 PSI
0-5V:'-12.0 bar to 12.0 bar;'-12.0 PSI to 12.0 PSI
0-255 min
Not used (0-NU)
Mid coil temperature (NTC10K)(1-MCT)
Mid coil pressure (0-5V)(2-MCP)
0-5V:'-1.5 bar to P2E; -21 PSI to P2E
NTC10K:'-40°C to P2E
0-5V: P2i to 99.9 bar; P2i to 999 PSI
NTC10K: P2i to 110°C
0-5V:'-12.0 bar to 12.0 bar;'-12.0 PSI to 12.0 PSI
NTC10K:'-12°C to 12°C
0-255 min
Not used (0-NU)
Discharge line temperature (1-DLT)
-12°C to 12°C
Not used (0-NU)
Ambient temp (NTC10K)(1-AMT)
Thermostat temp (NTC10K)(2-TMT)
Vapour inlet temp (NTC10K)(3-UIT)
Vapour outlet temp (NTC10K)(4-UOT)
Evaporator temp (NTC10K)(5-EPT)
Liquid temp (NTC10K)(6-LLT)
Suction line temp (7-SLT)
Coil temp (8-COT)
-12°C to 12°C
Factory Setting ZXDE ZXME ZXLE
Suction pressure (0-5V) L2
0 L2
15 L2
0 L2
5 L2
Mid coil pressure (0-5V) L2
0 L2
35 L2
0 L2
0 L2
Discharge line temperature L2
0 L2
Not used L2
0 L2
L2 L2
L2 L2
L2 L2
L2 L2
L2 L2
L2 L2
L2 L2
L2 L2
L2 L2
L2 L2
L2 L2
L2 L2
L2 L2
L2 L2
39