Saving Energy - Whirlpool AR1000 Use And Care Manual

7. Holding the cabinet on both sides, care-
fully lift cabinet off base. Watch out for
the sharp metal fins on the front and
rear coils.
8. Wrap the motor, electrical control box,
and compressor terminal box in plastic
film to make sure no water or other
liquids get inside. Water or other liquids
could damage the insulation and cause
serious mechanical problems.
9. Clean and hose out the base, coils, and
condensate pans. Clean air conditioner
at least once a year or more often if the
condenser coils and pans collect dirt,
sand, leaves, insects, or algae. Also,
clean the air conditioner if you detect an
odor coming from it.
10. Remove plastic film from the motor and
electrical parts.
11. Replace air conditioner in cabinet.
12. Replace the front panel.
NOTE: It is a good idea to wait 24 hours
before starting the air conditioner again.
Doing so allows time for all areas to
dry thoroughly.
The water from rainfall or from normal
operation does not harm the motor or
electrical parts.
Saving energy
You can help save energy by following the
tips below.
l
Improve your home's insulation. Seal all
doors and windows. Close the fireplace flue.
l
Close all blinds and drapes on sunny sides
of the house. Add window awnings.
l
Keep the air filter clean.
l
Do not block the airflow with drapes
or furniture.
l
Ventilate the attic. High temperatures in
the attic add to the air conditioner's
cooling load.
l
Try not to use heat-producing appliances
during the hottest part of the day.
l
Turn off lights and appliances when they
are not needed.
l
Keep heat registers and cool-air
returns closed.
l
Use exhaust venting fans when cooking,
doing laundry, or bathing.
9