Table of Contents
Advertisement
Available languages
Available languages
Fan Speed
1. Press FAN SPEED until you see the indicator light come on
for the setting you desire.
2. Choose Auto, Low, High or Turbo.
When Auto is selected, the fan speed will change
automatically as the temperature in the room changes.
7º or more above the set temperature will use Turbo.
4º - 7º above the set temperature will use High.
4º or below the set temperature will use Low.
Temperature
Press the TEMP plus pad. Display on air conditioner shows the
Temperature control setting. Each time you press or hold the plus
button, the temperature will increase 1º until it reaches 88°F
(31ºC).
Press the TEMP minus pad. Display on air conditioner shows the
Temperature control setting. Each time you press or hold the plus
button, the temperature will increase 1º until it reaches 66°F
(19ºC).
To change the temperature display from °F to °C
Press both pads at once to switch the display from ºF to ºC.
Timer Delay
To set the Timer for a 1- to 24-hour delay until the air
conditioner turns on (the air conditioner must be Off):
1. Press TIMER. Timer indicator light will remain on.
2. Press the plus or minus button to change the delay time from
1 to 24 hours.
3. To turn Timer off, press TIMER again, or press POWER to turn
off the air conditioner.
NOTE: The display will show time remaining until air conditioner
turns on.
To set the Timer delay for a 1- to 24-hour delay until the air
conditioner turns off (air conditioner must be On):
1. Press TIMER. Timer indicator light will remain on.
2. Press the plus or minus button to change the delay time from
1 to 24 hours. The display will automatically go back to the
set temperature after 12 seconds.
3. To display the amount of time left, depress TIMER once.
4. To turn Timer off, press TIMER again within 12 seconds.
To Operate Air Conditioner with Remote Control
NOTE: Remote control may vary in appearance.
NOTE: Two AA batteries (included) power the remote control.
Replace batteries after 6 months of use, or when the remote
control starts to lose power.
To turn the air conditioner on or off:
Press POWER.
To select the mode or Power Saver:
1. Press MODE to choose Cool or Fan Only.
2. Press POWER SAVER to choose Power Saver mode.
Cool, Fan Only or Power Saver—you can adjust the fan
speed.
Page 10
Hide quick links:
Advertisement
Table of Contents
