Checking The Leds On The Fsc; Fsc Run/Fail Led States - Cisco ASR 5500 Installation Manual

Checking the LEDs on the FSC

Checking the LEDs on the FSC
Each FSC is equipped with the following LEDs as shown in the accompanying figure:
• Run/Fail
• Active
• Redundancy
• Drive 1 Activity
• Drive 2 Activity
Figure 4: FSC Status LEDs
The possible states for all FSC LEDs are described in the sections that follow.

FSC Run/Fail LED States

The FSC Run/Fail LED indicates the overall status of the card. This LED should be green for normal operation.
The possible states for this LED are described in the following table. If the LED is not green, use the
troubleshooting information in the table to diagnose the problem.
Table 12: FSC Run/Fail LED States
Color
Green
Troubleshooting
12
Description
Card powered with no errors detected
Troubleshooting
Troubleshooting
None needed.