Checking The Leds On The Rcc; Rcc Run/Fail Led States - Cisco ASR 5000 Installation Manual

Troubleshooting
Table 20: Ethernet Line Card Interface Activity LED States
Color Description
Flashing Green Traffic is present on the link.
None No traffic is present on the link.

Checking the LEDs on the RCC

Each RCC is equipped with status LEDs as listed below:
• Run/Fail
• Active
• Standby
Figure 5: RCC LED Locations
The possible states for all of the RCC LEDs are described in the sections that follow.

RCC Run/Fail LED States

The Run/Fail LED indicates the overall status of the card. This LED should be green for normal operation.
Troubleshooting
None needed.
None needed if there is no activity on the link. Prior to
configuration, this is normal operation.
ASR 5000 System Administration Guide, StarOS Release 21.2
Checking the LEDs on the RCC
19