Page 1
SARATTO INSTRUCTION Acceptable weight and height Acceptable weight: 9 kgs through 18 kgs Acceptable height: 75 cm through 100 cm Age for reference: 1 through 4 year-old Note: Install Impact Shield without failure Acceptable weight: 15 kgs through 25 kgs...
Page 2
How to assemble 1. Joint booster seat and backrest together as shown in Fig. 2. Lift a backrest to upright position as shown in Fig. 3. Insert headrest into guide holes on backrest and depress it until it clicks. 4. Put a flap of seating surface into backrest as shown in Fig. Flap How to detach 1.
Page 3
How to use child safety seat with impact shield Place child safety seat on a car’s seat facing forward. Backrest of the product should contact car’s backrest as close as possible. Sit a child on a safety seat with its spine pressed against backrest. Install Impact Shield as it contacts with chest of child, and fix it by flaps right and left Impact Shield Flap...
Page 4
How to use child safety seat without impact shield Place child safety seat on a car’s seat facing forward. Backrest of the product should contact car’s backrest as close as possible. Sit a child on a safety seat deep in a seat. Buckle up safety seat belt for sure. Pass waist seat belt and shoulder seat belt throught conduit as shown in Fig.
Page 5
How to use booster seat 1. Place booster seat deep in on a car's seat. Sit a child deep in booster seat. Pass waist seat belt through conduit and buckle up for sure. Verify that safety best comes on groin so that child is restrained at pelvis. Pass shoulder seat belt through conduit.
Page 6
Unhook and unscrew applied and remove cover. Unhook Unhook Unscrew Unhook 5. Unhook hooks inside conduit and remove cover. Conduit Unhook...
Need help?
Do you have a question about the SARATTO and is the answer not in the manual?
Questions and answers