BASIC OPERATION
3.CHANGING CHANNELS
Using Channel Select (0-9, • (DOT), ENT)
•
When selecting the channel using Channel Select, complete input of the channel number by holding down the
button for the last digit for a moment.
•To select a 1- or 2-digit channel number (e.g., Channel 5):
Complete the following procedure within 4 seconds.
0
1.Press the
but ton.
•To select a 3-digit channel number (e.g. Channel 115):
Complete the following procedure within 4 seconds.
1.Press the
button.
1
To select a digit channel number (e.g. Channel 5.1):
•
Complete the following procedure within 4 seconds.
1.Press the
but ton.
5
Using LAST
•
・ Press
to switch the currently tuned channel to the previously tuned channel.
・ Press
again to switch back to the currently tuned channel.
4.INPUT SELECTION
Input
・You can select channels using Channel Select
(0-9, • (DOT), ENT) or CH (+)/(-).
5
2.Press the
but ton.
2.Press the
but ton.
1
Press the
but ton. 3.
2.
•
1.Press TV,DVD,PC,YPbPr,Video, HDMI on Remote Control directly.
2. a:Press Input on the remote control to display the Input
list.
b:Press ▲/▼ to select the desired source.
c:Press ENTER to switch the input source.
3.Press the
but ton.
ENT
3.Press the
but ton.
5
Press the
but ton.
1
22
4.Press the
but ton.
ENT
4.Press the
but ton.
ENT
Last