Changing the engine oil
Make sure the area around the drain plug and the oil filler cap are clean.
1.Remove the oil filler cap and the drain bolt to drain.
2.After reinstalling the drain bolt, refill the crankcase with the
recommended oil (see page 14).
• TORQUE: 54 N∙m (5.5 kgf∙m, 40 lbf∙ft)
3.Check if the oil level is up to the level gauge.
Oil capacity: 0.30 L (0.32 US qt, 0.26 lmp qt)
NOTE:
Draining the oil while the engine is still warm will make draining easily.
OIL FILLER CAP
DRAIN BOLT
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or
pour it on the ground.
32
UPPER LIMIT
LOWER LIMIT