Maintenance; Emptying The Dust Cup; Cleaning Filters; Replacement Filters - Shark Rocket DuoClean UV480 Series Owner's Manual

MAINTENANCE

IMPORTANT: Unplug the vacuum before performing any maintenance.

EMPTYING THE DUST CUP

The dust cup needs to be emptied each time you vacuum and periodically during cleaning, when debris in
the dust cup reaches the MAX fill line.
Press the wand releasebutton and lift the handheld
vacuum off the wand.
s h a r kc l e a n . c o m
Empty
With the dust cup attached to the handheld vacuum,
press the Empty button on the front of the dust cup.
OR
To remove the dust cup from the handheld vacuum,
squeeze the two Dust Cup Release buttons at the
same time and pull out the dust cup. Press the Empty
button on the front of the dust cup.
MAINTENANCE
IMPORTANT: Unplug the vacuum before performing any maintenance.

CLEANING FILTERS

Perform regular maintenance on the filters to keep your vacuum's suction power optimal.
IMPORTANT: To prevent damage, rinse filters with water ONLY. DO NOT use soap. Allow filters to air-dry for
at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts.
PRE-MOTOR FILTERS
Wash the pre-motor filters once a month.

REPLACEMENT FILTERS

Replacement Pre-Motor Filter Kit
XPMFK320
NOTE: The pre-motor filters should be replaced every 2.5 years. The post-motor filter should be replaced every 3 years.
POST-MOTOR FILTER
Wash the post-motor filter every 9 months.
Replacement Post-Motor Filter
1084FTV320
s h a r kc l e a n . c o m