1. Manuals
  2. Brands
  3. Wells Manuals
  4. Toaster
  5. FT-18
  6. Operation manual

Wells FT-18 Operation Manual

Finishing toaster
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
205a
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, P. O. Box 280
Verdi, NV 89439
Customer Service (775) 345-0444 Ext.502
fax: (775) 345-0569
www.wellsbloomfield.com
OPERATION MANUAL
MODEL
FT-18
FINISHING
TOASTER
Includes
INSTALLATION
USE & CARE
Model FT-18
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
p/n 305091 Rev. (-)
M205a 061202 cps

Advertisement

Table of Contents
loading

Related Manuals for Wells FT-18

Summary of Contents for Wells FT-18

  • Page 1 Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
  • Page 2 Seller’s obligation under this warranty is limited to the repair of defects without charge by a Wells Mfg. Co. factory authorized service agency or one of its sub-service agen- cies.

  • Page 3: Specifications

    PARTS & SERVICE CUSTOMER SERVICE DATA Thank You for purchasing this Wells Manufacturing Co. appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.
  • Page 4 FEATURES & OPERATING CONTROLS (continued)

  • Page 5: Precautions And General Information

    Do not operate this appliance if the keypad section of the control panel is torn or broken. Call your Authorized Wells Service Agent for service. The technical content of this manual, including any wiring diagrams, schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel.

  • Page 6: Agency Listing Information

    AGENCY LISTING INFORMATION STD 4 E6070 E6070 INSTALLATION NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation. Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual.

  • Page 7: Operation

    WARM-UP During warm-up, both displays flash while showing the last-used MENU temperature setpoint. A MENU cycle cannot be started while in warm-up mode. When setpoint temperature is reached, the display stops flashing and the audible alert beeps 3 times. SEASONING THE PLATENS The platens must be seasoned before attempting to toast product, in order to provide a hard, non-porous, non-stick surface.

  • Page 8: Cleaning Instructions

    CLEANING CAUTION: ELECTRIC SHOCK HAZARD DO NOT submerge or immerse toaster in water. CAUTION: BURN HAZARD Exposed portions of toaster are hot. Use care when working around the platens. Use insulated handles to raise and lower platens. CLEANING INSTRUCTIONS PRECAUTIONS: Press MENU 4 (cleaning mode).

  • Page 9: Maintenance Procedures

    ADJUST PLATEN TENSION 1. ADJUSTMENT LOCATION a. Right platen tension adjuster is located on back of the toaster, on back side of the right upright. b. Left platen tension adjuster is located on back of the toaster, on front side of the left upright. 2.
  • Page 10 Enter the 4-digit code. (NOTE: Factory setting is left MENU 1, left MENU 2, left MENU3, left MENU 4. Contact your Wells Authorized Service Agency for instructions in determining or changing your access code). Starting with the first digit, the bottom bar of the display moves to the top bar.
  • Page 11 Set the time with MENU 3 (increase) and MENU 4 (decrease). Press TEMP to save the time. The display will now advance to show zone temperature setpoints: 1.450 = Zone 1 @ 450ºF 2.450 = Zone 2 @ 450ºF 3.450 = Zone 3 @ 450ºF 4.450 = Zone 4 @ 450ºF Set the temperature setpoint for Zone 1 with MENU 3 (increase) and MENU 4 (decrease).

  • Page 12: Troubleshooting Suggestions

    Out of adjustment Internal damage SUGGESTED REMEDY Plug toaster into appropriate circuit. Reset circuit breaker Contact your Authorized Wells Service Agency for repairs Program zone temp (see pg. 8) Contact your Authorized Wells Service Agency for repairs Season platens (see pg. 5) Adjust tension (see pg.

  • Page 13: Parts And Service

    IMPORTANT: Use only factory authorized service parts and replacement filters. For factory authorized service, or to order factory authorized replacement parts, contact your Wells authorized service agency, or call: Wells Manufacturing Co. 2 Erik Circle P. O. Box 280 Verdi, NV 89439...
  • Page 14 Wells Manufacturing proudly supports CFESA Commercial Food Equipment Service Association WELLS MANUFACTURING COMPANY DIVISION OF CARRIER REFRIGERATION 2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439 Customer Service (775) 345-0444 Ext.502 fax: (775) 345-0569 www.wellsbloomfield.com...

Table of Contents