How Do I Log In On The Se Manager - Fujitsu BS2000 SE Series Quick Manual

2.1 How do I log in on the SE Manager?

Requirement
A Management Unit is powered on. It might be necessary to power on a Management Unit (MU) first, to make
the access to the SE Manager possible (see
"How do I power on a Management Unit via iRMC?"
If IP-based access rights are configured for accessing the SE server, the IP address of the PC must have a
permission.
Procedure
> Enter the FQDN (Fully Qualified Domain Name) or IP address of the active MU into the address bar of the
browser and press enter:
i
If the browser now displays a warning about the security certificate, click
The procedure for confirming or importing a certificate is described in more detail in the
"Administration and Operation" user guide in section "Confirming/importing a certificate in the web
browser".
The connection is established and the login window opens:
i
The login window is also displayed to permit you to log in again if you have logged out or the
session was terminated owing to inactivity.
> Enter your account and the respective password in the login window.
i Change the initial password for the account admin immediately after the first login (see also
information in chapter
"How do I power on a Management Unit via the local console?"
).
"Introduction" ).
Continue to this website
.
or
7