Installation Instructions - Wells Bulit-In Electric Griddles Operation Manual

Built-in electric griddles

Hide thumbs

Table Of Contents

Table of Contents

UNPACKING AND INSPECTION

1. Carefully remove the GRIDDLE from the carton. Remove all protective plastic film, packaging

materials and accessories from the GRIDDLE before connecting electrical power or otherwise

performing any installation procedures.

NOTE: DO NOT discard the CARTON and other PACKAGING MATERIAL until you have

inspected the warmer for hidden damage and tested it for PROPER OPERATION.

Refer to SHIPPING DAMAGE CLAIM PROCEDURE on page 1 of this manual.

2. Read all instructions in this manual carefully before starting installation of this griddle. READ AND

UNDERSTAND ALL LABELS AND DIAGRAMS ATTACHED TO THE GRIDDLE.

3. Carefully account for all components and accessories before discarding packing materials.

Store the accessories in a convenient place for later use:

INSTALLATION NOTES

1. Installation and start up of built-in griddles MUST be performed by an authorized installation company.

2. It is the RESPONSIBILITY OF THE INSTALLER to verify that this griddle installation is in

compliance with the specifications listed in this manual and on the specification sheet provided.

3. It is the RESPONSIBILITY OF THE INSTALLER to check with the AUTHORITY HAVING JURISDICTION,

in order to verify that this griddle installation is in compliance with local code requirements.

C. BUILT-IN GRIDDLES

1. This is a GENERAL GUIDE. For specific cutout dimensions and other installation details, refer to

the Installation Instructions supplied with the griddle.

2. Cutouts

Cutout dimensions for griddle and control panels are listed on the Installation Instructions

provided with the griddle.

Verify griddle and control panel dimensions before making cutout.

Griddles must be installed in all-metal counters only.

3. Installation

Verify that provided sealants are applied to the

underside of the top flange prior to setting the

unit into the cutout.

After installation, verify that the tabs on the

Wellsloks are turned out to lock the griddle into

the counter.

Apply a thin bead of food-grade silicone sealant

around the flange to seal it to the counter.

NOTE: Damage caused by leaks due to improper

installation is NOT covered by warranty.