Hafele PP9000 Installation Manual
Hafele PP9000 Installation Manual

Hafele PP9000 Installation Manual

Digital
Hide thumbs Also See for PP9000:

Advertisement

Digital door lock
Model PP9000
PP9000
Installation guide
* The contents of this user manual are subject to change without prior notice
to the user in order to enhance performance of the products.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PP9000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Hafele PP9000

  • Page 1 Digital door lock Model PP9000 PP9000 Installation guide * The contents of this user manual are subject to change without prior notice to the user in order to enhance performance of the products.
  • Page 2 Contents Product specification…………………………………………………………………………………...2 Components………….…………………………………………………………………………………3 Prepare for installation………….………………………………………………………………………4 Installation…………………………….…………………………………………………………………5...
  • Page 3: Product Specification

    Product specifications Outside panel Inside panel Reset button Upper cover CLOSE/OPEN button Reboot button Fingerprint sensor Touch keypad Emergency power port Manual open knob Card reader area Battery cover Key cylinder Mortise Lock Sensor latch Deadbolt Latch bolt Shaft socket...
  • Page 4: Components

    Components 1. Upper cover (1 pc) 7. Mounting plate (1 pc) 13. M5 Connecting screw bolt (4 pcs) 2. M6 Mounting screw (2 pcs) 8. M6 Connecting screw bolt (1 pc) 14. Strike assembly 3. Inside panel assembly (1pc) 9. Outside panel assembly (1 pc) -Left strike plate (1 pc) 4.
  • Page 5: Prepare For Installation

    Preparing for installation Check door open direction This product fits for all door open directions-Left-in/Left-out/Right-in/Right-out Indoor Indoor Outdoor Outdoor Indoor Indoor Outdoor Outdoor...
  • Page 6: Installation

    Installation 1. Mark and drill bores by using the installation 2. Fix 5 screw bolts on the front panel, place template first, then fix the mortise into the square shaft and pressure spring into the door frame and tighten the 2 screws to fix the bore.
  • Page 7 Installation 5. Place pressure spring and square shaft in the back 6. Insert the connecting wires of front panel into panel in proper order. the related sockets of the back panel. Then align and insert the square shaft into mortise hole, make the back panel against the door closely.

Table of Contents