Download  Print this page

Fire Sense 60757 Owner's Manual

Wall mounted electric fireplace
Hide thumbs

Advertisement

BLT-999W-2
Item # 60757

Advertisement

loading

  Related Manuals for Fire Sense 60757

  Summary of Contents for Fire Sense 60757

  • Page 1 BLT-999W-2 Item # 60757...
  • Page 2 Read these instructions completely before beginning installation. Failure to follow them could cause a heater malfunction resulting in serious injury and/or property WARNING: All electric heaters have hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are present.
  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Prior to plugging your heater into an electrical outlet, verify that the house circuit breakers for the outlet are The heater may emit a slight, harmless odor when first used. This odor is normal and it is caused by the initial heating of internal heater elements and will not occur again.
  • Page 5: Important Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS When using this electric fireplace, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Read all instructions before using this electric fireplace. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater. To prevent possible fire, do not block air intakes in any manner.
  • Page 7 Item # 60757 Wall Mount Electric Fireplace...
  • Page 8 30.55”...
  • Page 9: Locating Fireplace

    LOCATING FIREPLACE WARNING: Due to high temperatures, this electric replace should be located out of tra c. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9m) from the front of the heater. WARNING: Never locate this electric replace where it may fall into a bathtub or other water container.
  • Page 10: Unpacking And Testing Fireplace

    UNPACKING AND TESTING FIREPLACE Carefully remove the unit from the box. Prior to installing the unit, test to make sure the unit operates properly. To do this, plug the unit's power supply cord into a conveniently located 120-Volt grounded outlet. GROUNDING INSTRUCTIONS This insert is for use on 120 Volts.
  • Page 11: Installation

    WARNING: RISK OF FIRE! The power cord must not be pinched or against a sharp edge. Secure cord to avoid tripping or snagging to reduce risk of re, electric shock or personal injury. Do not run cord under carpeting. Do not cover cord with throw rugs, runned or the like.
  • Page 13 right side of the unit. (side view)
  • Page 14 left side below right...
  • Page 16 Bottom view Bottom view...
  • Page 17: Troubleshooting

    TROUBLESHOOTING WARNING: Turn off the fireplace completely and let cool OBSERVED PROBLEM Dim or no flame Ember bed is not glowing or dimming No warm air is coming out of the heater. Heat doesn’t turn on when it is set to Low setting. Fireplace turns off and will not turn on Fireplace will not come...
  • Page 18 At Well Traveled Living’s sole discretion, products under warranty will be repaired and/or replaced at no charge to the customer. Any returns sent back to Well Traveled Living must be sent via prepaid freight and in the original retail packaging.

This manual is also suitable for:

Blt-999w-2