Fire Sense 60353 Use And Care Manual

Well traveled living electric fireplace instuctions for use

Table of Contents

Need help?

Do you have a question about the 60353 and is the answer not in the manual?

Page 2 Thank you for purchasing a Fire Sense Electric Fireplace. Important: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible electric shock, fire hazard and will void the warranty. INSTALLATION INSTRUCTIONS – GENERAL Read all instructions before using this appliance.
Page 3: Specifications
Use this appliance only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire.
Page 4: For Your Safety
CONTROLS/LEG ASSEMBLY Your fireplace has the following functions: High heat 1350 watts Low heat 700 watts Please note: Both the low heat and high heat switches must be in the on position to achieve high heat. FOR YOUR SAFETY Service must be performed by a qualified service agency. REPLACING THE LIGHT BULBS This fireplace uses 2 clear 110 Volt, 40 Watt, E-12 socket base light bulbs (small base, chandelier candle type bulbs).
Page 5 3. Turn the fireplace so you are facing the back of the fireplace. 4. Look for the access plate with the gold printing on it. 5. Remove the 3 screws holding the access plate in position (FIG1). Once you have removed the 3 screws, lift the access plate so the 2 positioning tabs come free of their slots.

StoweStowe 60353