Weider Pro 4950 831.14623.0 User Manual page 19

34. Wrap the Lat Cable (49) under a 90mm Pulley
(48). Attach the Pulley and a Cable Trap (56) to
the second hole in the "U"-bracket (151) with an
M10 x 50mm Bolt (97), two Half Guards (55),
and an M10 Nylon Locknut (77). Make sure the
Cable Trap and Half Guards are oriented as
shown.
35. Wrap the Lat Cable (49) over a 90mm Pulley
(48). Attach the Pulley to the Left Top Frame
(126) wtih an M10 x 45mm Bolt (86) and an
M10 Nylon Locknut (77).
36. Wrap the Lat Cable (49) under a 90mm Pulley
(48). Attach the Pulley, a Cable Trap (56), and
two Half Guards (55) at the second hole from
the top of the two Pulley Plates (60) with an
M10 x 50mm Bolt (97) and an M10 Nylon
Locknut (77). Make sure the Cable Trap and
Half Guards are oriented as shown.
37. Wrap the Lat Cable (49) over a 90mm Pulley
(48). Attach the Pulley to the Right Top Frame
(4) with an M10 x 45mm Bolt (86) and an M10
Nylon Locknut (77).
34
49
48
56
77
55
35
126
48
77
36
77
60
56
37
4
77
48
19
55 97
151
86
49
55
49
55
48
97
60
86
49