Download Print this page

Advertisement

Quick Links

PATENT PENDING
USER'S MANUAL
Model No. 831.150460
Serial No.
The serial number can be found in the
location shown below. Write the serial
number in the space above.
Serial Number Decal (under
CAUTION
Read all precautions and instruc-
tions in this manual before
using this equipment. Save this
manual for future reference.
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

Advertisement

loading

Summary of Contents for Weider 831.150460

  • Page 1 PATENT PENDING USER'S MANUAL Model No. 831.150460 Serial No. The serial number can be found in the location shown below. Write the serial number in the space above. Serial Number Decal (under CAUTION Read all precautions and instruc- tions in this manual before using this equipment.
  • Page 2: Table Of Contents

    ADJUSTING THE WEIDER PRO 120 ........
  • Page 3: Before You Begin

    To help us assist you, please note the prod- uct model number and serial number before calling. The model number is 831.150460. The serial number can be found on a decal attached to the PRO 120 Weight Bench (see the front cover of this manual).
  • Page 4: Assembly

    ASSEMBLY Before beginning assembly, carefully read the following information and instructions: • Place all parts in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. • Read each assembly step before you begin. •...
  • Page 5 1. Before beginning assembly, be sure that you have read and understand the information on the previous page. Press a 38mm x 38mm Inner Cap (16) into the end of the Frame (1). Press Two 50mm Round Outer Caps (9) onto the Adjustment Leg (3). Press a 38mm x 50mm Inner Cap (8) into the end of the Adjustment Leg.
  • Page 6: Adjusting The Weider Pro 120

    ADJUSTING THE WEIDER PRO 120 The weight bench is designed to be used with your own weights (not included). The steps below explain how the weight bench can be adjusted. Refer to the accompanying exercise poster for exercise information. Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent.
  • Page 7: Part List

    PART LIST and EXPLODED DRAWING—Model No. 831.150460 Part Qty. Description 132209 Frame 132504 Pivot Leg 132506 Adjustment Leg 111855 M6 x 48mm Bolt 132137 M6 x 16mm Bolt 103805 Foam Pad 112402 3/4” Round Inner Cap 132142 38mm x 50mm Inner Cap...
  • Page 8: Full 90 Day Warranty

    SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179 Part No. 132207 R0996A The model number and serial number of your WEIDER are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal.

This manual is also suitable for:

Pro 120