Am/Fm Radio Operation; Part Name And Function; Radio Operation - Hitachi Zaxis 17U-5A Operator's Manual

AM/FM Radio Operation

Part Name and Function

1- Power Switch
Push this switch to turn ON/OFF the radio.
2- Sound Control Switch (SOUND)
Push this switch to adjust sound (Balance/Bass/Treble).
3- Up/Down Buttons (UP/DOWN)
This button is used to change the radio wave frequency,
adjust the sound parameter and the clock setting.
4- Display
Time, radio receiving frequency and operation mode are
displayed.
5- AM/FM Switch (AM/FM)
"FM" and "AM" are switched over alternately each time
the switch is pressed.
The display indicates the receiving station frequency.
6- Display Switch (DISP)
Push this switch to switch over the display between
radio wave frequency and time.
7- Preset Switch (PRESET)
One FM and MW (AM) station per button can be preset
using these respective buttons.
8- Volume Control Button (VOL)
Push this switch to adjust the volume.
Push the button to increase the volume in a step-by-
step manner.
Push the button to decrease the volume in a step-
by-step manner.

Radio Operation

1. Turn the engine key switch to ON position. Push radio
power switch (1) ON.
2. Select either MW (AM) or FM by operating AM/FM switch
(5).
3. Select the station according to your preference using
PRESET buttons (7) or UP/DOWN buttons (3).
4. Adjust the volume and tone according to your
preference.
5. When turning the radio OFF, repress power switch (1).
OPERATOR'S STATION
1-10
5 6
4
7 8
3 2 1
M1NE-01-003