Lifting Machine - Hitachi Zaxis 17U-5A Operator's Manual

Lifting Machine

d
WARNING:
 Use lifting cables and other lifting tools being free
from any damage and/or aging, and having sufficient
strength.
 Consult your nearest Hitachi dealer for correct lifting
procedures, and the size and types of lifting cable
and tools.
 Pull the pilot control shut-off lever to the LOCK
position so that the machine does not accidentally
move while being lifted.
 Incorrect lifting procedure and/or incorrect wire rope
attachment will cause the machine to move while
being lifted, resulting in machine damage and/or
personal injury.
 Do not lift the machine quickly. Excessive load will be
applied to the lifting wire ropes and/or lifting tools,
possibly causing them to break.
 Do not allow anyone to come close to or under the
lifted machine.
 The indicated gravity center is for the standard
specification machine. The gravity center will vary
depending on the kinds of attachments and/or
optional equipment to be installed or their position
to be taken. Therefore, take care not to lose the
balance of the machine while lifting.
 Be sure to set the blade position with the engine
running. Failure to do so may cause the blade to
be moved from the set-position when lifted with a
crane.
TRANSPORTING
6-7