Mechanical Installation - Huawei PDC-0250 Quick Installation Manual

Circuit breaker box
Table of Contents

Advertisement

PDC-(0250, 0400, 0630) DC0384BXA Battery Circuit
Breaker Box
Quick Installation Guide
Table 3-2 Torque for securing bolts
Bolt Specifications
M4
M6
M8
M10
M12

3.3 Mechanical Installation

Wall-mounted
Step 1 Install four mounting brackets on the BCB box using eight M4 screws.
Issue 03 (2019-05-20)
Before connecting cables, check that the BCB box has been installed properly and that the
circuit breaker on the BCB box is OFF.
Take protective measures, wear insulated gloves and shoes, and stand on the insulated pad
when connecting cables.
Do not simultaneously touch positive, neutral, and negative terminals to avoid electric
shocks when connecting battery cables.
Install power cables for the three BCB boxes based on their input and output currents.
The BCB box is wall-mounted or rack-mounted. Cables are routed in from the bottom and
out from the top. Reserve sufficient space on the top and bottom of the BCB box.
Connect cables according to terminal silk screen and wiring diagrams in this document.
Secure cables to the specified torques. Do not short-circuit or reversely connect battery
terminals.
When connecting cables, use an insulated wrench.
Copyright © Huawei Technologies Co., Ltd.
Torque
1.6 N· m
5 N· m
13 N· m
27 N· m
47 N· m
3 Installation
9

Advertisement

Table of Contents
loading

Table of Contents