Compliance and Approvals
This product has been independently tested and certified by
CNPP to EN50131-3.
The Galaxy Dimension is compatible with the relevant parts of
the following standards:
EN50131-1:2006 Alarm systems - Intrusion systems
General requirements (grade 3).
TS50131-3
Alarm systems - Intrusion systems: Part
3 Control and indicating equipment
(grade 3).
prEN50131-5-3
Alarm systems - Intrusion systems: Part
5-3 systems using wire-free
interconnections (grade 2).
EN50131-6:1998 Alarm systems - Intrusion systems -
Power supplies (grade 3).
EN50136-1-1:1998 Alarm systems – Alarm transmission systems
and equipment – General requirements for
alarm transmission systems.
EN50136-1-3:1998 Alarm systems – Alarm transmission systems
and equipment- Requirements for systems
with digital communicators using the public
switched telephone network.
EN50136-2-1:1998 Alarm systems – Alarm transmission systems
and equipment – General requirements for
alarm transmission equipment.
EN50136-2-3:1998 Alarm systems – Alarm transmission systems
and equipment – Requirements for
equipment used in systems with digital
communicators using the public switched
telephone network.
CE Standards, including all EN safety and EMC standards.
R&TTE 99/5/EC
PD6662:2004
Scheme for the application of European
Standards for intruder alarm systems.
DD243
Installation and configuration of intruder
alarm systems designed to generate
confirmed alarm conditions – code of
practice
BSIA guidelines for Remote Maintenance to systems installed
to EN50131-1.
Public Switched Telephone Network (PSTN) Approval
The equipment has been approved to Council Decision 98/482/EC for
Pan -European single terminal connection to the Public Switched
Telephone Network (PSTN). However due to differences between the
individual PSTNs provided in different countries the approval does not,
of itself, give an unconditional assurance of successful operation on every
PSTN network termination point. In the event of problems contact the
equipment supplier in the first instance. The Galaxy Dimension is
designed to interwork with the following networks:
Austria
France
Italy
Belgium Greece
Liechtenstein
United Kingdom
Denmark Iceland
Spain
Germany Finland
Sweden
NOTE: Contact the equipment supplier before using the Galaxy
Dimension on any network not listed.
Norway
Switzerland
Portugal
Luxembourg
Ireland
The Netherlands
HONEYWELL SECURITY LIMITED WARRANTY
Honeywell Security, and its divisions, subsidiaries and affiliates
("Seller"), 165 Eileen Way, Syosset, New York, 11791, warrants its
products to be in conformance with its own plans and specifications and
to be free from defects in materials and workmanship under normal use
and service for 24 months from the date stamp control on the product.
Seller's obligation shall be limited to repairing or replacing, at its option,
free of charge for materials or labour, any product that is proved not in
compliance with Seller's specifications or proves defective in materials or
workmanship under normal use and service. Seller shall have no
obligation under this Limited Warranty or otherwise if the product is
altered or improperly repaired or serviced by anyone other than
Honeywell factory service. For warranty service, return product
transportation prepaid to:
Honeywell Security, 6 Aston Fields Road, Whitehouse Industrial
Estate, Runcorn, Cheshire WA7 3DL
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF
MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE
DESCRIPTION ON THE FACE HERE OF. IN NO CASE SHALL
SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL
OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED, OR UPON ANY
OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS
OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE
OR FAULT.
Seller does not represent that the products it sells may not be
compromised or circumvented; that the products will prevent any
personal injury or property loss by burglary, robbery, fire or otherwise; or
that the products will in all cases provide adequate warning or protection.
Customer understands that a properly installed and maintained alarm may
only reduce the risk of a burglary, robbery, fire or other events occurring
without providing an alarm, but it is not insurance or a guarantee that
such will not occur or that there will be no personal injury or property
loss as a result.
CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR
ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS
BASED ON A CLAIM THE PRODUCT FAILED TO GIVE
WARNING. HOWEVER, IF SELLER IS HELD LIABLE, WHETHER
DIRECTLY OR INDIRECTLY, FOR ANY LOSS OR DAMAGE
ARISING UNDER THIS LIMITED WARRANTY OR OTHERWISE,
REGARDLESS OF CAUSE OR ORIGIN, SELLER'S MAXIMUM
LIABILITY SHALL NOT IN ANY CASE EXCEED THE PURCHASE
PRICE OF THE PRODUCT, WHICH SHALL BE THE COMPLETE
AND EXCLUSIVE REMEDY AGAINST SELLER.
This warranty replaces any previous warranties and is the only warranty
made by Seller on this product. No increase or alteration, written or
verbal, of the obligations of this Limited Warranty is authorized.
Honeywell Security (UK64)
Newhouse Industrial Estate
Motherwell
Lanarkshire
ML1 5SB
UK
IG1-0063 Rev 1.0
6