Items Supplied; Operation - Silvercrest SKH 60 B1 Operating Instructions Manual

__RU101393_B4.book Seite 6 Mittwoch, 28. Mai 2014 2:23 14
• Protect the cable against damage, e.g.
from:
- sharp edges
- hot places
- clamping or crushing
• Do not use any astringent or abrasive
cleaning agents.
• To avoid any risk, do not make modifi-
cations to the device. Repairs must be
carried out by a specialist workshop or
the Service Centre.
4.

Items supplied

1 set of headphones
1 set of operating instructions
5.

Operation

• Remove all packing material.
• Check that the device is undamaged.
Connecting
1. Set the sound source to a low volume.
2. Insert the TRS connector 7 into the
headphone socket of the sound source
(e.g. MP3 player, television).
Put on the headphones
1. Put on the headphones in such a way
that the marking R is on the right and L
is on the left.
2. Figure A: Adjust the size of the head-
phones to your head size using the two
adjustable headphone earpieces 3
and 5 by pulling out or pushing in the
brackets 2.
3. Set the volume of the sound source. En-
sure that you are still able to hear
sounds in your surroundings.
Connecting a second set of
headphones
The socket 4 can be used to attach a second
set of headphones with a 3.5 mm TRS con-
nector, to allow a second person to listen in.
6
GB