Download Print this page

Wayne 352001-001 Operating Instructions & Parts Manual

Submersible utility pump

Advertisement

Quick Links

Operating Instructions & Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
This portable, submersible utility pump
is designed for non- automatic use in
water. The units are equipped with a 9
ft. 3-prong grounding type power cord.
The discharge fitting is designed for
convenient attachment to a garden hose.
Unpacking
Inspect this unit before it is used.
Occasionally, products are damaged
during shipment. If the pump or
components are damaged, return
the unit to the place of purchase for
replacement. Failure to do so could
result in serious injury or death.
ReaD & fOllOw all InStRUCtIOnS
Save theSe InStRUCtIOnS
DO nOt DISCaRD
Safety Guidelines
This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates an
imminently
hazardous situation which, if not avoided,
WILL result in death or serious injury.
Warning indicates a
potentially
hazardous situation which, if not avoided,
COULD result in death or serious injury.
Caution indicates a
potentially
hazardous situation which, if not avoided,
MAY result in minor or moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
nOte: Information that requires special
attention.
© 2009 Wayne Water Systems
General Safety Information
CalIfORnIa PROPOSItIOn 65
contain chemicals, including lead, known
to the State of California to cause cancer
and birth defects or other reproductive
harm. Wash hands after handling.
GeneRal Safety
• Read all manuals included
with this product
carefully. Be thoroughly
familiar with the controls
and the proper use of the
equipment. Follow all instructions.
• Only persons well acquainted with
these rules of safe operation should
be allowed to use the unit.
flammable or explosive
fluids such as gasoline, fuel
oil, kerosene, etc. Do not
use in a flammable and/or explosive
environment. Pump only clear water.
Personal injury and/or property damage
will result.
shock! This pump has not
been tested for use in
swimming pool or marine
areas. Never place pump in pools while
people are in the water.
pump with wet hands or
when standing in water or on
a damp surface.
shock! This pump is supplied
with a grounding conductor
and grounding type attachment
plug. Use a grounded (GFCI) receptacle to
reduce the risk of fatal electrical shock.
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.waynepumps.com
Submersible
Utility Pump
1. Wear safety glasses at all
This product or
its power cord may
2. It is required that this unit be
3. Do not use the power cord or
MANUAL
Installation and Operation
Always disconnect
electric supply
Do not
before attempting
pump
to install, service, relocate or perform
any maintenance. If the power source is
out of sight, lock and tag in open (off)
position to prevent unexpected power
application. Failure to do so could result
in fatal electrical shock!
Risk of
designed for use in septic
electric
tanks or underground vaults
to pump raw sewage or effluents. Never
use in hazardous or explosive locations.
1. This pump has been designed with
Do not
handle
Risk of
2. To reduce leakage between the
electric
RUP160
times when working with
pumps.
plugged into a Ground Fault Circuit
Interrupter (GFCI). Consult a local
electrician for installation and
availability.
discharge hose to carry or handle the
pump. Damage to the power cord
or discharge hose may occur. Use the
handle supplied on the pump.
This unit
is not
1-1/4 NPT discharge size. Connect pipe
or fitting to the discharge threads or
connect the supplied garden hose
elbow fitting to the pump. Thread
the female end of the garden hose to
the male discharge on the pump.
pump and the hose, place a hose
washer (not included) on the garden
hose before installing to the pump.
352001-001 8/09

Advertisement

loading

Summary of Contents for Wayne 352001-001

  • Page 1 REMINDER: Keep your dated proof of purchase for warranty purposes! © 2009 Wayne Water Systems Submersible Utility Pump General Safety Information CalIfORnIa PROPOSItIOn 65 This product or...
  • Page 2 Operating Instructions and Parts Manual Installation and Operation (Continued) 3. For best pump performance, unwind the hose before starting the pump. This will help remove any kinks or binds in the hose and allow the unit to pump with less restriction. 4. Set the pump on a hard, flat surface in the water. Do not set the pump directly on mud or sand surfaces. This will cause the inlet screen to clog. 5. The water level must be at least 1-1/2 inches for the pump to prime and operate. Water levels less than 1-1/2 inches will not allow the impeller to contact water and no water will be pumped. Do not handle pump with wet hands or when standing in water or on a damp surface when the unit is operating or fails to operate.
  • Page 3 For Replacement Parts or Technical Assistance, call 1-800-237-0987 Please provide following information: - Model number - Serial number (if any) - Part description and number as shown in parts list Address parts correspondence to: Wayne Water Systems 101 Production Drive Harrison, OH 45030 U.S.A. notes Ref. Description Shaft seal Impeller O-ring Volute reducer fitting Elbow adapter Inlet plate Base RUP160 RUP160 21208-001 28099-001 19047-001 28100-001 28101-001 28102-001 28103-001...
  • Page 4 Operating Instructions and Parts Manual One Year Limited Warranty For one year from the date of purchase, Wayne Water Systems Division ("Wayne") will repair or re p lace, at its option, for the original purchaser any part or parts of its Water Pumps (“Product”) found upon examination by Wayne to be defective in materials or work m an s hip. Please call Wayne (800-237-0987) for instructions or see your dealer. Be pre p ared to provide the model number and the serial number when exercising this warranty. All transportation charges on Products or parts submitted for repair or replacement must be paid by purchaser. This Limited Warranty does not cover Products which have been damaged as a result of accident, abuse, misuse, neglect, improper installation, improper maintenance, or failure to operate in accordance with Wayne’s written instructions. theRe IS nO OtheR eXPReSS waRRanty. IMPlIeD waRRantIeS, In ClUD InG thOSe Of MeR Chant aBIl I ty anD fItneSS fOR a PaRtICUlaR PUR POSe, aRe lIMIteD tO One yeaR fROM the Date Of PURChaSe. thIS IS the eXClUSIve ReM e Dy anD any lIaBIlIty fOR any anD all InDIReCt OR COnSeQUentIal DaM aG eS OR eXPenSeS whatSOeveR IS eXClUDeD.

This manual is also suitable for:

Rup160