Related Manuals for Waterford Glass Island Hood
Summary of Contents for Waterford Glass Island Hood
- Page 1 An AGA Company GLASS ISLAND HOOD - 90 CM GLASS ISLAND HOOD - 90 CM To be installed by a trained and competent person INSTALLATION & OPERATING MANUAL To be left with end user...
-
Page 2: Warning And Safety Information
WARNING & SAFETY INFORMATION Please read this manual carefully, it provides important information about the safety, installation, use and main- tenance of the appliance. The manufacturer cannot be considered responsible for any damage caused by improper, incorrect or unreasonable use. WARNING! Do not connect the appliance to the mains until the installation is fully complete. -
Page 3: Installation
GENERAL GUIDELINES Before installing and /or using the cooker hood, please read these instructions carefully. Before installing the cooker hood make sure the volt- age (V), frequency (Hz) indicated on the serial num- ber plate and specifications on the rating plate on the inside of the cooker hood correspond to the voltage and frequency of the mains supply. -
Page 4: Control Panel
CONTROL PANEL The control panel is situated on the front of the hood and comprises of a digital display and 5 touch con- trol switches with the following functions: (See Fig.9) Fan ON/OFF Switch Reduces the speed of the fan (Min speed 1) Digital display,displays the speed of the fan 1-6... - Page 5 THE MANUFACTURER WILL NOT BE RESPONSIBLE IF THESE RECOMMENDATIONS AND INSTRUC- TIONS REGARDING INSTALLATION, MAINTENANCE AND USE ARE NOT OBSERVED AND RESPECTED WHEN USING THE COOKER HOOD. Vents Fig.3 Fig.1 Fig.2 Riveted Brackets Fig.2a...
- Page 6 Fig.4 Fig.6 Fig.5 Clips to hold Hood Glass glass in place...
- Page 7 Fig.7 DIMENSIONS...
-
Page 8: Warranty
We undertake to repair or replace, free of charge to you any part found to be faulty within the 12 month period from the date of purchase provided that:- The fault is, in our opinion, caused by defective workmanship, or material and not by accident, misuse, neglect or normal wear and tear.