Reference Illustrations - Water Boss 550 Installation And Service Manual

Reference Illustrations

Figure 1 - Installation Guide
Use this diagram as a location and installation guide for your Model 550
and Model 900 water conditioners. This diagram applies to all types of installations
,
(i.e. basement, slab, crawl space, outside).
Bypass Valves. To simplify installation and servicing, a one-piece or a three way bypass
valve appliance is recommended when installing your appliance. A bypass appliance also pro-
vides access to untreated water when required (i.e. for lawn and gardening purposes.)
Also, see figures 4 through 6.
Caution: If less than 10 feet of pipe connect the water treatment appliance(s), to the water heater,
then a Check Valve must be installed between the water treatment appliance and the water heater.
Install the Check Valve as close to the water heater as possible.
When calling the HelpLine, please have this guide and the serial number
available. From 8 am to 5 pm EST, call 1-800-437-8993.
Your serial number may be found on top of your valve assembly.
5
Model 700 ,
,