Sharp Auvi MD-DR7 Operation Manual page 119

CHANGING DEFAULT SETTINGS
1. Insert a MiniDisc.
2. While in the stop mode, press the MENU button.
3. Select "SET UP" by pressing the
press the MENU button.
4. Select the menu by pressing the
press the MENU button.
5. Select the item by pressing the
press the MENU button.
Menu
BEEP
Key-touch tone
AUTO PLAY
Auto play
POWER SAVE
Auto power save
DIGI LEVEL
Digital recording level Setting retained
REMOTE LCD NORMAL
Backlight on the
remote control
NORMAL Display: Always displayed.
Backlight: Lit for approx. 10 seconds when
operated.
ALL TIME Display: Always displayed.
Backlight: Lit for approx. 10 seconds when
operated.
(Always lit when operated with AC power.)
AUTO OFF Display: Displayed for approx. 10 seconds
when operated.
Backlight: Lit for approx. 10 seconds when
operated.
(pages 67 - 68)
or button and
or button and
or button and
Item
ON OFF
Beep on Beep off
ON OFF
Set Canceled
AUTO OFF
Set Canceled
AUTO SAVE NOT SAVE
Canceled
ALL TIME AUTO OFF
See below.
1-BIT PORTABLE MINIDISC RECORDER MD-DR7
(pages 70 - 81)
EDITING MINIDISCS
Editing can be done only on the main unit.
Titling a recorded MiniDisc
Creating a disc name
1. Insert a recorded MiniDisc and cancel the group mode.
2. Press the button to light the "
3. Press the MENU button.
4. Select "NAME" by pressing the
press the MENU button.
5. When "DISC NAME" appears, press the MENU button.
You can enter characters now.
6. Press the DISP button to select the type of characters.
Katakana Alphabetic characters (capital letters)
betic characters (small letters)
7. Select a character by pressing the
press the MENU button.
Repeat the operation to enter other characters.
8. After entering all characters, hold down the MENU button for
2 seconds or more. The disc name has been created.
Creating a group name
1. Insert a group-recorded MiniDisc.
2. Press the or button while in the stop mode to
choose the group to be named.
3. Press the MENU button.
4. Select "NAME" by pressing the
press the MENU button.
5. When "GROUP NAME" appears, press the MENU button.
You can enter characters now.
6. Enter characters in the same procedures as steps 6 – 7 in
"Creating a disc name".
7. After entering all characters, hold down the MENU button for
2 seconds or more. The group name has been created.
(pages 70 - 73)
".
or button and
Alpha-
Numbers and symbols
or button and
or button and
119