Menu Item Einstellung [Setting]; Menu Item Verbrauch [Consumption] - Bosch TR8500 15/18 DESOAB Operating Instructions Manual

Operating the appliance
Select the menu items
The following menu items can be selected:
• Turn the rotary selector switch: to switch between
the menu items in the current menu level.
• Briefly press the rotary selector switch: to navigate
to the next menu level or to confirm a selection.
Note: Following a successful entry, the selected value will be displayed
for 10 seconds.
Exit the menu
• Select Zurück [back] in the menu.
or
• Press any comfort key.
Note: If no entry is made within 30 seconds, then the appliance
automatically exits the menu.

Menu item Einstellung [setting]

4.4
Important: The entries for Datum / Uhrzeit [date / time] and Kosten
[cost] are required in order to subsequently retrieve consumption
figures from Verbrauch [consumption]. If no entry is made,
then the appliance only displays partial values.
Example of a menu setting
In this example, the language is to be set to Englisch [english].
The factory setting for the menu language is Deutsch [german].
To change the language to Englisch [english]:
• Press and hold the rotary selector switch for at least 5 seconds.
• Turn the rotary selector switch and select Einstellung [setting].
Press the rotary selector switch.
• Turn the rotary selector switch and select Sprache [language].
Press the rotary selector switch.
• Turn the rotary selector switch and select Englisch [english].
Press the rotary selector switch. The language is now set to English.
• Wait a moment or press the rotary selector switch.
• Turn the rotary selector switch. Select other menu items and enter
settings.
or
• Press any comfort key to exit the menu.
10
The following settings can be selected
Verbrauch
[consumption]
Einstellung
[setting]
Sprache
[language]
Datum / Uhrzeit
[date / time]
Kosten
[cost]
Reset
[reset]
Anzeige prüfen
[display test]
Zurück
[back]
Zurück
[back]

Menu item Verbrauch [consumption]

4.5
Note: If either no entry is input or if the entry is incomplete under
Einstellung [setting], then only the consumption figures accumulated
since initial start-up (or since last reset) are displayed: Gesamtlaufzeit
[total currency].
Example of a consumption readout
To display the energy consumption:
• Press and hold the rotary selector switch for at least 5 seconds.
• Turn the rotary selector switch and select Verbrauch [consumption].
Press the rotary selector switch.
• Turn the rotary selector switch and select Energie [energy].
Press the rotary selector switch.
• Turn the rotary selector switch and select Jahr [year]. The energy
consumption of the selected year is displayed in kWh.
• Turn the rotary selector switch and select Monat [month]. The energy
consumption of the selected month is displayed in kWh.
TR8500 15/18 | 21/24 | 24/27 DESOAB – 6 720 876 029 (2018/01)
Press and hold
for 5 seconds
Display consumption figures,
see chapter "Menu item
Verbrauch [consumption]"
Enter settings
Set language to German
or English
Enter current date
and time (in order
to retrieve consumption
figures later on)
Enter cost for Energie [energy]
per kWh and Wasser [water]
3
per m (in order to retrieve
consumption figures later on)
Delete all individual
entries and reload factory
default settings
Show all symbols
One menu level back
Exit the menu