Title to the Licensed Software is not transferred to the Customer. Customer is granted a nonexclusive license to use the Licensed Software on a single Decoding Computer basis. The Licensed Software cannot be shared among multiple Decoding Computers. Each Decoding Computer must have Its own separately Licensed Software.
Page 5
Relocate the Decoding Computer with respect to the radio or television. Move the Decoding Computer away from the radio or television. Plug the Decoding Computer into a different outlet so that the Decoding Computer and radio or television are on different branch circuits.
Table of Contents IMPORTANT SAFETY INSTRUCTIONS..7 FRONT PANEL..8 FRONT PANEL CONTROLS..9 REMOTE CONTROL ..12 REAR PANELS ..14 UNPACKING..16 SET-UP AND INSTALLATION ..16 AC POWER CONNECTION ..17 POWER-UP RESET ..17 CARE AND MAINTENANCE..
Page 8
Wadia 9 Decoding Computer. Manufactured under strict quality control standards, the Wadia 9 is a superb example of state-of -the-art digital technology We encourage you to read this manual thoroughly and to carefully follow all...
Avoid placing the Wadia 9 Decoding Computer where it will be subject to direct sunlight or low temperatures. 7) The Wadia 9 Decoding Computer should only be connected to a power supply as directed on the rear panel.
FRONT PANELS WADIA 9 DECODING COMPUTER: The front panel of the Wadia 9 Decoding Computer is simple and elegant, with only a single information window, with three individual screens, to indicate the status of the unit. All functions are accessed through the remote control.
Wadia 9 INPUT: The Wadia 9 Decoding Computer has 3 Glass Optical digital inputs. The input that is selected through the remote control will be indicated in the information window. Again, if no source is connected to the input, then NO DATA will also appear. If a digital source is connected to the input selected, the information window will indicate the sampling rate of the source.
Page 12
If one of the other two screens (other than the LEVEL / MUTE screen) is selected from the remote control, after about 5 seconds of displaying the information desired, the information window will revert to displaying the LEVEL / MUTE screen. DECODING COMPUTER...
Page 13
There are then a series of six LEDs which correspond to the six inputs. The last LED is DATA, which will illuminate when an input is selected that has a digital source connected to it. I,,NwT45, POWER D A T A DECODING COMPUTER ti DIGITAL cuss WncAA wlEefM3...
ND!3 MUTE: Places the Wadia 9 Decoding Computer in / out of mute. Mute on the Wadia 9 Decoding Computer is at absolute zero, or at no volume. Pressing the MUTE button again, or either of the VOLUME buttons, will take the unit out of MUTE.
Page 15
VOLUME: These keys allow the digital volume control level to be decreased or increased on the Wadia 9 Decoding Computer. There are 100 discreet levels to this volume control varying in size from l/5 dB to 1 dB per step. If the Wadia 9 is to be connected to a pre-amplifier to adjust volume, then the level should be set at its maximum (100).
72 or more hours. Do not connect or disconnect the power cord unless the Wadia 9 Decoding Computer is not connected to another component in the system, or unless the amplifier is either turned off or not connected to the loudspeakers.
Page 17
Wadia 9 (Pin 1: Ground, Pin 2: Not Inverted Signal, Pin 3: Inverted Signal). AC Power Connector: There is a standard 3-pin connector to which the AC cord should be connected which will provide power to the Wadia 10. DECODING COMPUTER...
Place the Wadia 9 Decoding Computer on a flat, stable surface and turn it onto either of its sides (The finish of the metal work can be protected by first placing a soft cloth or towel down onto which the Wadia 9 can be placed).
CARE AND MAINTENANCE To clean the Wadia 9 Decoding Computer, use a soft cloth moistened with plain water. Don’t apply water, dusting sprays, solvents, abrasives, or cleaning fluids directly to the chassis. Make sure that the remote sensor window on the front of the product and the remote control’s projection lens are kept clean and dust free.
5 Years for all parts of the product (excluding batteries). The warranty period begins at the time the product is first shipped from Wadia Digital and is subject to the following requirements and understandings: The product must not have been modified in any manner whatsoever, or the warranty is immediately voided.
Massive multiple power-plane layers. 3 Toroidal Transformers. Toroidal Transformer. The Wadia 9 Decoding Computer, the Wadia 9 Power Supply, and the Wadia 10 Glass Optical Interface are of Airborne computer quality, machined from a solid block of aluminum. Detuned for Lenz’ s Law and package parasitic resonances.
Need help?
Do you have a question about the DECODING COMPUTER and is the answer not in the manual?
Questions and answers